This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies. Find out more
OK

Hygiene & Infection

Microorganisms control

Microorganisms are part of our daily lives. Usually, their infection risk is not considered particularly high. Not so in medical practices - here, the risk of infection is much higher. The frequent change of patients and the nature of the work itself require consequent hygiene measures. Doctors are obliged towards their staff, their patients and themselves to use highly effective hygiene and disinfection agents.
With its GREEN&CLEAN product range, METASYS meets all hygiene requirements and regulations. Advanced active and conditioning agents guarantee absolute safety and infection control. CE markings and VAH listings vouch for the products' high quality standards.
With GREEN&CLEAN, you can ensure optimal hygiene in all areas of the dental practice!

Special Areas

to ensure safety and hygiene in the dental office

In dental offices, particular attention must be given to the proper cleaning and disinfection of special areas. This does not only apply to amalgam separators and suction systems, but also the spittoon and the disinfection of impressions and prosthetic workpieces.

At least once each working day, the contaminated inner surfaces of the suction system (suction hoses) must be disinfected. (Source: RKI guidelines). Preparations with defoaming properties are particularly suitable for this purpose. These ensure the proper function of the amalgam and separator as well as the disinfection of the suction hoses in order to prevent backflow.

To clean the spittoon, enzyme-based cleaners are particularly suitable which thoroughly dissolve protein and remove limescale and colour sedimentation.

Impressions and prosthetic workpieces may only be handed over to a third party after prior disinfection. Immersion disinfection as well as automated spray disinfection are appropriate for this purpose. When disinfecting impressions, make sure that the product used is suitable for the particular material. Unsuitable disinfectants or improper use (action times!) may affect the dimensional stability.

Brochure GREEN&CLEAN

M2 intro kit new

GREEN&CLEAN M2

Disinfection and deodorising of suction systems

M2 intro kit
M2 refill kit I
M2 refill kit II
M2 red - 25 x 500 ml
M2 green - 25 x 500 ml
Dispenser for M2
Upgrade kit for M2 dispenser

For further information - see Download Area

Watch on Youtube: How to use GREEN&CLEAN M2

Dual, actively defoaming and very economical concentrate for the effective disinfection of the entire system including the amalgam separator.

Features:
  • excellent active defoaming
  • enzymatic product with excellent protein dissolving power
  • dual system (red/green) active against resistance
  • easy handling and dosage through well-designed dispenser
  • high material and environmental compatibility
  • ideal for all amalgam separators and air-water separators
  • modern active agent combination: alkylamine, quaternary ammonium compounds, enzymes
  • broad spectrum of efficacy: HBV/HIV/HCV, bactericide, fungicide (C. albicans), tuberculocide
  • DGHM/VAH listed (Association for Applied Hygiene/Germany)
  • CE 0044


 

image by WebDog

GREEN&CLEAN CL

actively defoaming concentrate for cleansing and deodorizing evacuation systems

CL intro kit
CL refill kit

For further information - see Download Area

Concentrate for cleansing and deodorizing suction systems. Very economical 0.8% concentration - 1 bottle lasts for 100 applications. With active defoamers, good protein soubility. Aldehyde and phenol free.

Features:
  • excellent active defoaming
  • highly economical concentrate
  • easy handling
  • high environmental compatibility
  • high material compatibility

image by WebDog

GREEN&CLEAN AD

Disinfectant for impressions and prosthetic works

AD canister 5 l

For further information - see Download Area

Highly effective, ready-to-use solution for rapid and sustained immersion disinfection of all prosthetics, dentures as well as dental impressions made of silicone, alginate, hydrocolloids and polyether.

Features:
  • short action time: 5 minutes
  • form stability certificate (Fresenius Institute)
  • no impairment of surface quality or dimensional stability of the impressions
  • excellent cleaning power
  • high material compatibility
  • formaldehyde and phenol-free
  • standing time: 7 days
  • broad spectrum of efficacy: HIV/HBV/HCV/HSV 1, bactericide, fungicide (C. albicans), tuberculocide
  • CE 0044

image by WebDog

GREEN&CLEAN MB

cuspidor cleaner

MB start
MB intro kit
MB refill kit I
MB refill kit II
MB replacement brushes (4 pcs.)
MB dispensing bottle with brush, empty

Watch on Youtube: How to use GREEN&CLEAN MB

For further information - see Download Area

Practical application through an integrated brush dispenser based on citric acid and enzymes for an optimal cleaning of the cuspidor

Features:
  • dissolves limescale and colour sedimentation
  • excellent protein dissolving power through enzymatic ingredients
  • ideal for all amalgam separators
  • modern active agent combination: quaternary ammonium compounds, tenside, enzymes